Design of this waste incinerators is typical. Solid waste has built in carbon which supports self combustion if it is loaded in the chamber where temp of 750 c is maintained. Hence we maintain the loading chamber temp to 750 C through Automatic Gas Burner, at this temp waste release its in built Heat and raise temp of chamber to 850 C. Thus waste is incinerated by self support Heat in primary chamber and is allowed to further incineration in secondary chamber at temp 1050 c maintained by separate Fuel fired Automatic Burner.
Manufacturing Range- 100 to 2000 kg per day
Operating Temp Maximum- 1200 C
Operating Fuels- LDO/HSD/Gas
Incinerators may be stationary or Rotary depending upon Sold waste and its quantum. These waste incinerators are operated at Min 850 C in Primary chamber and 1050 C in secondary chamber. Thus incinerated solid waste and product of combustion are passed through fuel Gas Temp Dilutor, Cyclone separator, and wet Scrubbing system. Before it is exhausted to Atmosphere through Induced draft fan and chimney.
Discharged gas will be pollution controlled within Norms of GPCB for SO2, NOX, HCL and SPM. Incinerator is refractory lined and backed with Cera Wool or with Insulating Bricks. Temperature controller in both Primary and secondary chambers are provided to control required combustion.
Burners are fully automatic and operate on the temperature of the syetem. Rotary Incinerators are driven by reduction gear arrangement which fully maintain the contact time between Fuels and material. From One end Material is loaded and at other end ashes are collected.